( items)

Sales & Advice
0191 645 1685

£41.75Postbox Red EPDM 1-4mm 25kg bag 

Postbox Red EPDM 1-4mm 25kg bag £ 41.75 In stock
Colour
Black
Beige
Tierra
Blue
Bright Yellow
Brown
Dark Grey
Earth Yellow
Egg
Green
Light Blue
Light Green
Light Grey
Mid Grey
Orange
Pink
Post Box Red
Purple
Red
Teal

Quantity:
 

Wet Pour

EPDM granules topping, SBR crumb base and resin mixes.

  • Manufactured in the UK.
  • High spread rate,i.e. high volume to weight ratio thus cost effective
  • High elasticity.
  • Less filler such as calcium carbonate as with much imported EPDM
  • Full fade resistant colour
  • Quotes and methods provided
  • Installation service available

Wet Pour rubber safety surfacing is suitable for playground installations where impact absorbent surfacing is a requirement up to the appropriate Maximum Free Fall Height (see chart below). It can be used around complex configurations of playground equipment and ground contours.

Wet Pour surfacing for playgrounds is slip-resistant and non-abrasive to young children. It is porous, so no puddles.

Colourful graphics can be created within the Wet Pour rubber surfacing to any attractive theme you may choose in order to enhance and add considerable play value to your playground. Games can also be added such as hopscotch, snakes and ladders, alphabet snakes, etc. Download the Surfacing section of our product book for ideas.

Bases

Our Playground wetpour rubber surfacing system is designed to be laid onto the following sub-bases; –

  1. Up to 12mm stone no-fines concrete or open-textured bitmac
  2. MOT Type 1 stone (surfaces with a thickness of 50mm or more)
  3. Existing tarmac or concrete, subject to being in good condition
  4. Other existing surfaces/bases, subject to preparation in accordance with specific recommendations

 

Material

Wetpour rubber safety surfacing is recycled bonded rubber, mixed on site using special equipment and laid to exacting standards. The base layer is SBR (Styrene Butadiene Rubber). The top layer is recycled EPDM (Ethylene Propylene Di Monomer). Virgin rubber can be supplied if requested.

Colours and Graphics

Wetpour for playground installations is available in the colours shown on the link in the side bar

Wetpour critical fall heights

Wetpour Mixer & Tools

CreteAngle Model L112  

 

CRETEANGLE WETPOUR MIXER

Forced action pan-type wetpour mixer available in a range of petrol or diesel engines. Designed for mixing rubber granules and low density, light weight materials with capacity up to 2 x 25kg bags (depending on model). Robust steel construction complete with safe guarding to head/pan and motor/engine/gearbox.

Further technical information available on request.

 
Roller straight  

 

WETPOUR ROLLERS

Ideal for creating the perfect finish on large difficult to reach areas. All steel construction 114mm diameter roller complete with 1600mm handle. Available in a range of widths – 400mm, 600mm & 800mm.

 
Roller Trough ROLLER TRAY

 

Lightweight fibreglass construction suitable for containing release agent and light solvent. Measures approximately 870mm long x 330mm wide x 160mm high, weight 2.5kgs. 

 
Float cropped  

 

WETPOUR TROWEL

Wetpour long-nosed 400mm steel trowel. Ideal for achieving a perfect finish, particularly for intricate areas, graphics and around surface edges.

 
Drum Tap 1  

 

DRUM TAP

2″ Treacle drum tap suitable for dispensing viscous fluids. Cast Iron body with brass faceplate for an excellent seal and easy flow control. Can be dismantled for easy cleaning.

Drum Stand  

 

DRUM TROLLEY / STAND

Drum trolley and pouring stand for 210 litre steel drums (250kgs). Suitable for most terrains. Measures approximately 1,220mm x 800mm wide x 310mm high. Height of bung 360mm, weight 22kgs.

We also stock a static version which is smaller in size.

Critical Fall Height Requirements

Wetpour Mixer & Tools

CreteAngle Model L112  

 

CRETEANGLE WETPOUR MIXER

Forced action pan-type wetpour mixer available in a range of petrol or diesel engines. Designed for mixing rubber granules and low density, light weight materials with capacity up to 2 x 25kg bags (depending on model). Robust steel construction complete with safe guarding to head/pan and motor/engine/gearbox.

Further technical information available on request.

 
Roller straight  

 

WETPOUR ROLLERS

Ideal for creating the perfect finish on large difficult to reach areas. All steel construction 114mm diameter roller complete with 1600mm handle. Available in a range of widths – 400mm, 600mm & 800mm.

 
Roller Trough ROLLER TRAY

 

Lightweight fibreglass construction suitable for containing release agent and light solvent. Measures approximately 870mm long x 330mm wide x 160mm high, weight 2.5kgs. 

 
Float cropped  

 

WETPOUR TROWEL

Wetpour long-nosed 400mm steel trowel. Ideal for achieving a perfect finish, particularly for intricate areas, graphics and around surface edges.

 
Drum Tap 1  

 

DRUM TAP

2″ Treacle drum tap suitable for dispensing viscous fluids. Cast Iron body with brass faceplate for an excellent seal and easy flow control. Can be dismantled for easy cleaning.

Drum Stand  

 

DRUM TROLLEY / STAND

Drum trolley and pouring stand for 210 litre steel drums (250kgs). Suitable for most terrains. Measures approximately 1,220mm x 800mm wide x 310mm high. Height of bung 360mm, weight 22kgs.

We also stock a static version which is smaller in size.

 

Customers who bought this item also bought these


Online - Start Chat?

Your name *

 

Cancel