EPDM granules topping, SBR crumb base and resin mixes.
Wet Pour rubber safety surfacing is suitable for playground installations where impact absorbent surfacing is a requirement up to the appropriate Maximum Free Fall Height (see chart below). It can be used around complex configurations of playground equipment and ground contours.
Wet Pour surfacing for playgrounds is slip-resistant and non-abrasive to young children. It is porous, so no puddles.
Colourful graphics can be created within the Wet Pour rubber surfacing to any attractive theme you may choose in order to enhance and add considerable play value to your playground. Games can also be added such as hopscotch, snakes and ladders, alphabet snakes, etc. Download the Surfacing section of our product book for ideas.
Our Playground wetpour rubber surfacing system is designed to be laid onto the following sub-bases; –
Wetpour rubber safety surfacing is recycled bonded rubber, mixed on site using special equipment and laid to exacting standards. The base layer is SBR (Styrene Butadiene Rubber). The top layer is recycled EPDM (Ethylene Propylene Di Monomer). Virgin rubber can be supplied if requested.
Wetpour for playground installations is available in the colours shown on the link in the side bar
BARON WETPOUR MIXERS
Forced action pan-type wetpour mixer available in a range of petrol or diesel engines. Designed for mixing rubber granules and low density, light weight materials with capacity up to 2 x 25kg bags (depending on model). Robust steel construction complete with safe guarding to head/pan and motor/engine/gearbox. http://www.monstermulch.co.uk/baron-e120-forced-action-mixer-120l-1-1kw-110v-i555.htm
Further technical information available on request.
Ideal for creating the perfect finish on large difficult to reach areas. All steel construction 114mm diameter roller complete with 1600mm handle. Available in a range of widths – 400mm, 600mm & 800mm.
Lightweight fibreglass construction suitable for containing release agent and light solvent. Measures approximately 870mm long x 330mm wide x 160mm high, weight 2.5kgs.
Wetpour long-nosed 400mm steel trowel. Ideal for achieving a perfect finish, particularly for intricate areas, graphics and around surface edges.
2″ Treacle drum tap suitable for dispensing viscous fluids. Cast Iron body with brass faceplate for an excellent seal and easy flow control. Can be dismantled for easy cleaning.
DRUM TROLLEY / STAND
Drum trolley and pouring stand for 210 litre steel drums (250kgs). Suitable for most terrains. Measures approximately 1,220mm x 800mm wide x 310mm high. Height of bung 360mm, weight 22kgs.
We also stock a static version which is smaller in size.
Your name *